Spritix
  • Features
  • Pricing
Log inSign up
X (Twitter)
Spritix
How to Create a Custom Sprite Action from a Prompt
Published: 2026/11/20

How to Create a Custom Sprite Action from a Prompt

Follow Cargo Bot from a one-line prompt to a sprite sheet. Generate and confirm the first and last frames in Spritix Studio, then play the finished result.

Cargo Bot starts on the floor with a hand planted beside it. Three seconds later it’s standing with both hands on its hips. The motion prompt is one sentence. In Studio, we also made two stills to show exactly where it should start and finish. The first and last frames shown with the animation are the inputs used for this result.

First frame
Stand Up · First frame
Last frame
Stand Up · Last frame
Stand Up sprite animation

Push off the ground and stand with your hands on your hips.

Start with the action you want to see

Open a prepared character in Spritix Studio, choose Single direction, then open Custom and choose New action. Name it and describe what happens between the two poses. For Cargo Bot, that’s pushing off the floor, getting upright, and bringing both hands to its hips. You can copy the action prompt above and use it as a starting point.

Set Quality to Mid to use an ending pose alongside the starting pose. In Starting pose, select First / last frames. If your original character image already works as the opening pose, keep it. Low uses the starting frame only. Need a character first? The character animation walkthrough covers that part.

Cargo Bot’s Custom editor with its Stand Up prompt and separate First frame and Last frame controls

Make the opening and ending poses

First frame. Open the First frame row and choose Original or a saved image as the reference. In Image description, describe the pose at the instant the animation starts. For the bot, we used “Sit on the ground with one hand braced beside you.” Click Generate, preview the new candidate in the gallery, then click Use this pose to apply it.

Last frame. Go back and open Last frame. Pick a reference and describe the position the bot should settle into: “Stand tall with both hands on your hips.” Click Generate, pick the candidate that keeps both hands where you want them, and click Use this image. The In use marker tells you which picture is applied to that slot.

Each new image costs 1 credit to generate. You can preview the candidates and confirm one before you spend credits on the animation.

First frame editor showing Cargo Bot’s seated pose in use, its reference image, and the Generate button

Last frame editor showing Cargo Bot’s hands-on-hips pose in use, its reference image, and the Generate button

Connect the poses, then check the movement

Back in the action editor, we used Once, 3 seconds, and Mid. Once fits this move because the bot ends in a standing pose. Choose Loop for a repeating action, then check the seam in the result. You can set the duration from 2 to 12 seconds. The 3-second Mid animation costs 30 credits. Low costs 3 credits per second, and Mid costs 10 credits per second. Check the total on Generate before you click.

Play the result and watch the hand that pushes off. Then check if both hands settle at the hips once the bot is upright. If the pose is wrong, update the corresponding still. If the timing inside the movement is off, adjust the action description. If you only have extra frames at the start or end, use Trim.

When the preview looks right, open Settings & Export, apply your frame settings, and open Export. For an engine workflow, start with Sprite Sheet PNG and add Atlas JSON if you need frame coordinates and timing. The export formats guide covers GIFs and individual PNG frames too.

Three more ways to shape an action

Ironwatch Guard raises a shield

“Chest height” gives the shield a specific place to stop. We also used two frames on this run, from the shield held low to the crouch that closes the move.

First frame
Shield Raise · First frame
Last frame
Shield Raise · Last frame
Shield Raise sprite animation

Raise your shield to chest height and hold a crouch.

Trail Scout takes one step

“One small step to the right” controls how far the character travels. For this result we used the starting frame and let the description carry the rest of the motion. The preview plays at the pace of the edited Studio export.

Sneak Step sprite animation

Stay crouched and take one small step to the right.

Pip’s little hops become a loop

The useful part of Pip’s generation was a 1.08-second section. We found a repeatable interval with Perfect Loop. Check the landing and the first crouch together when you try this on your own clip. The loop editing guide shows how to trim and check the join.

Cap Bounce sprite animation

Pip does a short rhythmic series of little hops in place. On each beat his knees bend, his mushroom cap squashes slightly, both boots briefly lift together, and he lands back in the same spot. Keep the hops small and vertical. Preserve his face, two yellow spots, plum boots, and crisp pixel-art palette. Finish in the exact grounded opening pose so the sequence can repeat.

All Posts

Author

Spritix Team

Categories

  • Product
Start with the action you want to seeMake the opening and ending posesConnect the poses, then check the movementThree more ways to shape an actionIronwatch Guard raises a shieldTrail Scout takes one stepPip’s little hops become a loop

More Posts

Prepare a Character for Single or Eight-Direction Animation
Product

Prepare a Character for Single or Eight-Direction Animation

Create a character from an image or description, review the reference, and prepare consistent facing directions for your game.

avatar for Spritix Team
Spritix Team
2026/11/07
How to Create and Export Character Animations in Spritix
Product

How to Create and Export Character Animations in Spritix

Start with an image or a character description, create preset or custom actions, refine the animation, and export files for your game.

avatar for Spritix Team
Spritix Team
Updated 2026/11/17
Import a Spritix Sprite Sheet into Godot
Product

Import a Spritix Sprite Sheet into Godot

Slice a sprite sheet, create a walk animation with AnimatedSprite2D, and match playback speed in Godot 4.

avatar for Spritix Team
Spritix Team
Updated 2026/11/07
Spritix

Turn one character image into consistent, game-ready animation assets with our AI sprite generator.

GitHubGitHubXX (Twitter)DiscordYouTubeYouTubeEmail
Product
  • Sprite Sheet Maker
  • Features
  • Pricing
  • FAQ
Resources
  • Blog
  • Character animation
  • Custom Action
  • Animation loops
  • Export formats
Alternatives
  • Compare tools
  • AutoSprite alternative
  • Sprite AI alternative
Company
  • About
  • Contact
  • Crunchbase
  • Reviews on G2
Legal
  • Cookie Policy
  • Privacy Policy
  • Refund Policy
  • Terms of Service
🇺🇸English🇧🇷Português (Brasil)🇰🇷한국어🇯🇵日本語🇫🇷Français🇩🇪Deutsch🇮🇹Italiano🇪🇸Español🇨🇳繁體中文🇨🇳简体中文
© 2026 Spritix All Rights Reserved.